home *** CD-ROM | disk | FTP | other *** search
- ANYWARE ANTIVIRUS
- ===========================================================================
-
- To setup the ANYWARE ANTIVIRUS Program so that it detects viruses during
- the boot up of the system and to install the program onto your hard drive,
- go to the A:\ or B:\ prompt, according to which drive the diskette is in,
- and type "SETUP".
-
- Now, follow the installation instructions shown on the screen. Note: The
- instructions will give you the option to make the ANYWARE ANTIVIRUS Program
- detect viruses every time you boot up the drive.
-
- To run the ANYWARE ANTIVIRUS Program from your hard drive, type "cd\anyware"
- to go into the ANYWARE directory. Type "anyclean" to start the ANYWARE
- Program. Use the F1 key for the on-line help.
-
- To print out the ANYWARE ANTIVIRUS Manual go to your floppy disk, either the
- A:\ or B:\ prompt, according to which drive the diskette is in and type in
- the following command: "ANYMAN.ASC>PRN"
-
- Once the manual has been printed, follow its instructions on how to use the
- ANYWARE Program.